 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PHOTOCOUPLER PS8802-1,-2 1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED PHOTOCOUPLER DESCRIPTION The PS8802-1, -2 are optically coupled isolators containing a GaAlAs LED on the light emitting diode (input side) and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip. The PS8802-1, -2 are designed specifically for high common mode transient immunity (CMR), the PS8802-2 is suitable for high density applications. -NEPOC Series- FEATURES * 40% reduction of mounting area (5-pin SOP x 2) * High common mode transient immunity (CMH, CML = 15 kV/s MIN.) * High supply voltage (VCC = 35 V) * High isolation voltage (BV = 2 500 Vr.m.s.) * High-speed response (tPHL = 0.8 s MAX., tPLH = 1.2 s MAX.) * Ordering number of tape product: PS8802-1-F3, F4: 1 500 pcs/reel : PS8802-2-F3, F4: 1 500 pcs/reel * Pb-Free product * Safety standards * UL approved: File No. E72422 * DIN EN60747-5-2 (VDE0884 Part2) approved (option) 1 2 8 7 PIN CONNECTION (Top View) 6 PS8802-1 5 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC 34 APPLICATIONS * Computer and peripheral manufactures * General purpose inverter * Substitutions for relays and pulse transformers * Power supply 8 7 6 1 2 PS8802-2 5 1. Anode1 2. Cathode1 3. Cathode2 4. Anode2 5. GND 6. VO2 7. VO1 8. VCC 34 Document No. PN10418EJ07V0DS (7th edition) Date Published August 2008 NS The mark 2003, 2008 PS8802-1,-2 PACKAGE DIMENSIONS (UNIT: mm) 5.210.25 6.00.2 3.950.1 3.270.2 0.15 +0.10 -0.05 0.10.1 1.27 0.4 +0.10 -0.05 0.25 M 0.50.3 0.10 S 2 Data Sheet PN10418EJ07V0DS PS8802-1,-2 MARKING EXAMPLE SnBi PLATING PS8802-1 PS8802-2 8802-1 NL831 N N L 8 31 No. 1 pin Mark Initial of NEC (Engraved mark) Type Number Assembly Lot 8802-2 NL831 N N L 8 31 No. 1 pin Mark Initial of NEC (Engraved mark) Type Number Assembly Lot Week Assembled Year Assembled (Last 1 Digit) Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) Rank Code In-house Code (L: Pb-Free) Rank Code Ni/Pd/Au PLATING PS8802-1 PS8802-2 8802-1 NT831 N N T 8 31 No. 1 pin Mark Initial of NEC (Engraved mark) Type Number Assembly Lot 8802-2 NT831 N N T 8 31 No. 1 pin Mark Initial of NEC (Engraved mark) Type Number Assembly Lot Week Assembled Year Assembled (Last 1 Digit) Week Assembled Year Assembled (Last 1 Digit) In-house Code (T: Pb-Free) Rank Code In-house Code (T: Pb-Free) Rank Code Data Sheet PN10418EJ07V0DS 3 PS8802-1,-2 ORDERING INFORMATION Part Number Order Number Solder Plating Specification Pb-Free (SnBi) Packing Style Safety Standard Approval Standard products (UL approved) Application *1 Part Number PS8802-1 PS8802-1 PS8802-1-F3 PS8802-1-F4 PS8802-2 PS8802-2-F3 PS8802-2-F4 PS8802-1-V PS8802-1-V-F3 PS8802-1-V-F4 PS8802-2-V PS8802-2-V-F3 PS8802-2-V-F4 PS8802-1 PS8802-1-F3 PS8802-1-F4 PS8802-2 PS8802-2-F3 PS8802-2-F4 PS8802-1-V PS8802-1-V-F3 PS8802-1-V-F4 PS8802-2-V PS8802-2-V-F3 PS8802-2-V-F4 PS8802-1-A PS8802-1-F3-A PS8802-1-F4-A PS8802-2-A PS8802-2-F3-A PS8802-2-F4-A PS8802-1-V-A PS8802-1-V-F3-A PS8802-1-V-F4-A PS8802-2-V-A PS8802-2-V-F3-A PS8802-2-V-F4-A PS8802-1-AX PS8802-1-F3-AX PS8802-1-F4-AX PS8802-2-AX PS8802-2-F3-AX PS8802-2-F4-AX PS8802-1-V-AX PS8802-1-V-F3-AX PS8802-1-V-F4-AX PS8802-2-V-AX PS8802-2-V-F3-AX PS8802-2-V-F4-AX 20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel 20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel PS8802-2 20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) PS8802-1 20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel PS8802-2 Pb-Free (Ni/Pd/Au) 20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel Standard products (UL approved) PS8802-1 20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel PS8802-2 20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) PS8802-1 20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel PS8802-2 *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10418EJ07V0DS PS8802-1,-2 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Diode Forward Current Reverse Voltage Power Dissipation Detector Supply Voltage Output Voltage Output Current Power Dissipation Isolation Voltage *3 *2 *1 Symbol IF VR PD VCC VO IO PC BV TA Tstg Ratings 25 5.0 45 35 35 8.0 100 2 500 -55 to +100 -55 to +125 Unit mA/ch V/ch mW/ch V V/ch mA/ch mW/ch Vr.m.s. C C Operating Ambient Temperature Storage Temperature *1 Reduced to 0.45 mW/C at TA = 25C or more. *2 Reduced to 1.00 mW/C at TA = 25C or more. *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-4 shorted together, 5-8 shorted together. Data Sheet PN10418EJ07V0DS 5 PS8802-1,-2 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Forward Voltage Reverse Current Forward Voltage Temperature Coefficient Terminal Capacitance Detector High Level Output Current High Level Output Current Low Level Output Voltage High Level Supply Current (PS8802-1) High Level Supply Current (PS8802-2) Low Level Supply Current (PS8802-1) Low Level Supply Current (PS8802-2) Coupled Current Transfer Ratio Input-Output Isolation Resistance Insulation Resistance (Input-Input), (PS8802-2) Input-Output Isolation Capacitance Insulation Capacitance (Input-Input), (PS8802-2) Propagation Delay Time *1 (H L) Propagation Delay Time *1 (L H) Common Mode Transient Immunity at *2 High Level Output Common Mode Transient Immunity at *2 Low Level Output tPHL tPLH CMH IF = 0 mA, VCC = 5 V, RL = 4.1 k, VCM = 1.5 kV IF = 16 mA, VCC = 5 V, RL = 4.1 k, VCM = 1.5 kV 15 IF = 16 mA, VCC = 5 V, RL = 2.2 k, CL = 15 pF 0.3 0.6 0.8 1.2 kV/s CI-I 0.3 CI-O V = 0 V, f = 1 MHz 0.6 pF RI-I VI-I = 1 kVDC, RH = 40 to 60% 10 10 Symbol VF IR IF = 16 mA VR = 3 V IF = 16 mA Conditions MIN. TYP. 1.7 MAX. 2.2 10 Unit V A mV/C pF VF/TA Ct IOH (1) IOH (2) VOL ICCH -2.1 30 10 500 100 0.1 0.1 0.4 2 V = 0 V, f = 1 MHz IF = 0 mA, VCC = VO = 5.5 V IF = 0 mA, VCC = VO = 30 V IF = 16 mA, VCC = 4.5 V, IOL = 1.2 mA IF = 0 mA, VO = open, VCC = 30 V nA A V A 0.2 4 ICCL IF = 16 mA, VO = open, VCC = 30 V 100 200 CTR RI-O IF = 16 mA, VCC = 4.5 V, VO = 0.4 V VI-O = 1 kVDC, RH = 40 to 60% 15 10 11 25 45 % s CML -15 6 Data Sheet PN10418EJ07V0DS PS8802-1,-2 *1 Test circuit for propagation delay time PS8802-1 (PW = 1s, Pulse input (IF) Duty cycle = 1/10) Input (Monitor) 47 VCC = 5 V 0.1 F RL = 2.2 k VO (Monitor) CL = 15 pF Input (IF = 7.5 mA) 50% Output PS8802-2 Pulse input (IF) (PW = 1s, Duty cycle = 1/10) Input (Monitor) 47 VCC = 5 V tPHL RL = 2.2 k VO (Monitor) 0.1 F CL = 15 pF tPLH 1.5 V VOL Remark CL is approximately 15 pF which includes probe and stray wiring capacitance. *2 Test circuit for common mode transient immunity PS8802-1 VCC = 5 V RL = 4.1 k 0.1 F VO (Monitor) CL = 15 pF VCM 90% IF 10% VCM tr VO (IF = 0 mA) VCC = 5 V RL = 4.1 k 0.1 F VO (Monitor) CL = 15 pF VO (IF = 16 mA) tf VOH 2V 0.8 V VOL 1.5 kV 0V PS8802-2 SW IF VCM USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. Data Sheet PN10418EJ07V0DS 7 PS8802-1,-2 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 120 100 80 60 40 20 50 Diode Power Dissipation PD (mW) 40 30 20 10 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 TA = +100C +50C +25C 10 000 High Level Output Current IOH (nA) HIGH LEVEL OUTPUT CURRENT vs. AMBIENT TEMPERATURE IF = 0 mA Forward Current IF (mA) 1 000 VCC = VO = 30 V VCC = VO = 5.5 V 10 100 1 0C -25C 10 0.1 1 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0.1 -25 0 25 50 75 100 Forward Voltage VF (V) Ambient Temperature TA (C) CURRENT TRANSFER RATIO vs. FORWARD CURRENT Current Transfer Ratio CTR (%) NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Raio CTR 80 70 60 50 40 30 20 10 0 0.5 1 5 10 VCC = 4.5 V, VO = 0.4 V 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 50 75 100 Normalized to 1.0 at TA = 25C, IF = 16 mA, VCC = 4.5 V, VO = 0.4 V 50 Forward Current IF (mA) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. Data Sheet PN10418EJ07V0DS 8 PS8802-1,-2 OUTPUT CURRENT vs. OUTPUT VOLTAGE 10 25 mA 20 mA Output Current IO (mA) Output Voltage VO (V) OUTPUT VOLTAGE vs. FORWARD CURRENT 6 5 4 3 2 1 5.6 k 8 15 mA 6 10 mA RL = 2.2 k 4 2 IF = 5 mA 0 2 4 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20 Output Voltage VO (V) Forward Current IF (mA) PROPAGATION DELAY TIME vs. FORWARD CURRENT Propagation Delay Time tPHL, tPLH (s) Propagation Delay Time tPHL, tPLH (s) PROPAGATION DELAY TIME vs. LOAD RESISTANCE 10 VCC = 5 V, IF = 16 mA, CTR : 25% tPLH 3.0 VCC = 5 V, RL = 2.2 k, CTR : 25% 2.0 1 1.0 tPHL tPHL tPLH 0 5 10 15 20 25 0.1 1k 10 k Load Resistance RL () 100 k Forward Current IF (mA) Normalized Propagation Delay Time tPHL, tPLH NORMALIZED PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE 5 Normalized to 1.0 at TA = 25C, IF = 16 mA, VCC = 5 V, RL = 2.2 k 4 3 2 tPLH tPHL 1 0 -50 -25 0 25 50 75 100 Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. Data Sheet PN10418EJ07V0DS 9 PS8802-1,-2 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 5.560.1 2.00.05 4.00.1 1.750.1 1.5+0.1 -0 4.05 MAX. 1.70.1 8.00.1 12.00.2 5.50.1 6.40.1 3.60.1 0.30.05 Taping Direction PS8802-1-F3 PS8802-2-F3 PS8802-1-F4 PS8802-2-F4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 R 1.0 21.00.8 3302.0 13.00.2 1001.0 13.51.0 17.51.0 Packing: 1 500 pcs/reel 11.9 to 15.4 Outer edge of flange 10 Data Sheet PN10418EJ07V0DS PS8802-1,-2 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 1.45 5.25 1.27 0.8 Data Sheet PN10418EJ07V0DS 11 PS8802-1,-2 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) * Flux 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. 12 Data Sheet PN10418EJ07V0DS PS8802-1,-2 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10418EJ07V0DS 13 PS8802-1,-2 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Application classification (DIN EN 60664-1 VDE0110 Part 1) for rated line voltages 300 Vr.m.s. for rated line voltages 600 Vr.m.s. Climatic test class (DIN EN 60664-1 VDE0110) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Clearance distance Creepage distance Comparative tracking index (DIN IEC 112/VDE 0303 Part 1) Material group (DIN EN 60664-1 VDE0110 Part 1) Storage temperature range Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Tsi Isi Psi Ris MIN. 150 150 600 10 9 Symbol Speck Unit IV III 55/100/21 UIORM Upr 566 849 Vpeak Vpeak Upr 1 061 Vpeak UTR 4 000 2 >4.0 >4.0 Vpeak mm mm CTI 175 III a Tstg TA -55 to +125 -55 to +100 12 C C Ris MIN. Ris MIN. 10 11 10 C mA mW 14 Data Sheet PN10418EJ07V0DS PS8802-1,-2 * The information in this document is current as of August, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PN10418EJ07V0DS 15 PS8802-1,-2 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. |
Price & Availability of PS8802-2-F3-A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |